USED FENDER JAPAN (-2015) / PB62-US OCR [05]

Fender Japan PB62-US OCR is in stock.

The PB62-US OCR is a faithful reproduction of the '62 Precision Bass, and is carefully crafted in Japan.
Alder is used for the body material, and you can enjoy the rich overtones that are typical of basses.

The pickups are made in the U.S.A., and while they retain the low tone of a plebe, they are not overly aggressive, making it an easy instrument to handle and play in an ensemble.

The truss rod is fully tightened in the tightening direction, but there is no major warping and no problem in playing.

There is no noticeable damage to the exterior, and although there are some dents on the sides of the body, a buckle mark on the back, and a ding on the tip of the head, the instrument remains in relatively clean condition.

If you are looking for a bass that is different from the current Fender Japan, please consider this bass.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: S026599
Country of manufacture: Japan
Case: Soft Case
Weight: 4.12kg
Truss Rod: At the limit of the rod with a note of caution, the neck is currently in good condition.
Fretboard Height: No problem, fretboard height is sufficient.
String Height Bass String Side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 42.88mm
Neck thickness near 1st fret: 21.40mm
Neck thickness near 12th fret: 24.21mm
SCALE: 864mm (34")
RADIUS: 184mm (7.25")
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, and gouge removal

Specs: D'Addario EXL165 / .045-.105 set

Item Rank
B+: Some scratches, but no problem in normal use

12 months old

Serial No.
S026599

Country of manufacture
Japan

Case
Soft case

Weight
4.12kg

Truss Rod
Note: Neck currently in good condition at rod limit

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
2.5mm above 12th fret

String height on treble string side
2.0mm above the 12th fret

Nut width
42.88mm

Neck Thickness near 1st Fret
21.40mm

Neck thickness near 12th fret
24.21mm

Scale
864mm (34")

RADIUS
184mm (7.25")

Strings for setup
D'Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, and gouge removal