USED IBANEZ / RGRTB621-BKF Black Flat [05]

The IRON LABEL series reverse head "RGT" model, all in black, gives a tight impression.

- Through-neck design for rich sustain
- Nitro Wizard neck shape boasts high rigidity.
The Nitro Wizard neck shape is thin enough for high playability, but the combination of hard woods also provides rigidity and rich sustain.
- Ebony fingerboard with quick note rise and rich sustain.
- Light-storing fingerboard side position inlays for easy position reading even on a dark stage
- Independent mono-rail bridge for each string
Independent structure for each string transmits the string vibration directly to the body, resulting in a straight sounding body and rich overtones.
The bridge has a wide range of saddle adjustment and can be flexibly adjusted for down-tuning.
- Gotoh MG-T locking machine head
The Gotoh MG-T locking machine head, which is known for its tuning stability, has been adopted for the convenience of string changes. By turning the dial with your finger, you can easily lock the strings through the post holes.
- DiMarzio Fusion Edge Black Covered Pickups
The DiMarzio Fusion Edge Black Covered Pickups feature a rich high frequency response and moderate output power that could easily be mistaken for single coils, and a tone suited for modern and progressive metal.
- dyna-MIX10 switching system with Alter Switch
The dyna-MIX10 switching system with Alter Switch allows the user to freely switch between humbucker and single coil modes with 10 different sound variations.
In the power-tap mode, one coil is tapped and the other coil is specially wired to bring out the low frequency range of the other coil, resulting in clear highs and a thick, clear sound that cannot be obtained with a simple tap.
This is a switching system for the modern guitar player who has to play multiple roles with limited equipment.

* There are some dents and picking scratches on the top of the body, but there are no problems with playability.

Item Rank: B+: Some scratches, but no problem in normal use.

Serial Number: 1P01I221210737
Case: Soft case
Weight: 3.4kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment

Specs & Condition

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Serial No.
1P01I221210737

Case
Soft case

Weight
3.4kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Strings in setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment