USED FENDER JAPAN / MG69 Old Lake Placid Blue [05]

Fender Japan's MG69 is now in stock.
From the serial number, it is believed to have been produced between 2010 and 2012.

It has a basswood body, maple neck, and rosewood fingerboard.

Although it has some signs of use, it has been checked and adjusted as a whole by a professional repair person after arrival and is in good playing condition.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: U018730
Year of manufacture: 2010-2012
Country of manufacture: Japan
Case: Soft case
Accessories: Arm
Weight: 3.15kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 0mm above 12th fret
Nut width: 40.2mm
Neck thickness near 1st fret: 21.3mm
Neck thickness near 12th fret: 24.2mm
SCALE: 610mm (24")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and Maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment, string grounding correction, 1st string peg correction

Specs

Item Rank
B+: Some scratches, but no problem in normal use

12 months old

Serial number
U018730

Year of manufacture
2010-2012

Country of manufacture
Japan

Case
Soft case

Accessories
Arm

Weight
3.15kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
0mm above the 12th fret

Nut width
40.2mm

Neck thickness near 1st fret
21.3mm

Neck thickness near 12th fret
24.2mm

Scale
610mm (24")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment, string ground correction, 1st string peg correction