USED HAMER / USA Chaparral / Hondurus Mahogany body / Ebony Fret board / Pearl Yellow [05]

Hamer's "Chaparral", one of the most iconic brands of the 80's, is now in stock! This is one that has been kept in unbelievably clean condition!

Hamer" is a brand that symbolizes the 80's. Hamer is an iconic brand from the 80's. Mr. Steve Stevens has used this guitar, and it has a strong image of a hard rock guitar brand.

This model has a Honduran mahogany body, a jet-black ebony fingerboard, and other materials that are hard to find nowadays.

The yellow color, which has a strong image as the color of hard rock guitars in the 80s, has a great impact. The "boomerang inlay" that makes this model even more impressive is also very 80's!

The 24th fret, SSH, Floyd Rose, and slightly heel-cut joints were revolutionary at the time.

The pickups are original Seymour Duncan pickups, and the pitch of the pickups is matched to the pitch between the strings of the Floyd Rose bridge, with two magnets for each string.

The pickups are designed to pick up the sound evenly even when the strings are shaken by vibrato or chalking, allowing for more persistent chalking (or vibrato) with distortion applied! Above all, the powerful sound is exhilarating!

What is also surprising is the good condition of this unit.
The instrument, which must have been made more than 30 years ago, is still in existence with almost no scratches and the paint is shining.

In terms of playability, the neck is straight, the truss rod has plenty of room, and the frets are still in good shape.

When you try to acquire an instrument of the same age, you have to accept the aging of the instrument, but this guitar will bring back the excitement of purchasing a brand new guitar in that era.

Body Material | Honduras mahogany
Body Finish | Gloss
Neck | Maple
Neck Finish | Satin
Fingerboard | Ebony 12 Radius (304.8 mm)
Frets | 24
Position Inlays | Mother of pearl boomerang inlays
Nut (Material) | Schaller/Floyd Rose Locking nut and string retainer
Nut Width | 1.625" (41.3 mm)
Tuning Machines | Hamer (Schaller)
Scale Length | 25.5" (64.8 cm)
Bridge | Schaller/Floyd Rose Licensed bridge
Pickups | Seymour Duncan Original (HSS)
Pickup Switching | 3-Position Blade
Controls | Volume, Tone
Hardware Finish | Black
Strings | Nickel Plated Steel (.009-.042 Gauges)
Case/Original Hard Case

* This is a very clean used instrument from that time, but there are some scuffs and scratches. Please understand this in advance.

Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: 438029
Country of manufacture: USA
Case: Hamer original hard case
Accessories: Arm, wrench, papers
Weight: 3.70kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 1.6mm above 12th fret
String height on treble string side: 1.6mm above 12th fret
Nut width: 41.3mm (1.625 inch)
Neck thickness near 1st fret: 21.0 mm
Neck thickness near 12th fret: 23.0 mm (0.06 in.)
Scale: 648mm (25.5")
Strings at setup: .009-.042 set

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
438029

Country of manufacture
USA

Case
Hamer genuine hard case

Accessories
Arm Wrench Paperwork

Weight
3.70kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right.

Fret remaining
No problem, there is enough fret height

String Height Low String Side
1.6mm above 12th fret

String height on treble string side
1.6mm above the 12th fret

Nut width
41.3mm (1.625 inch)

Neck thickness near 1st fret
21.0 mm (1.625 in.)

Neck thickness near 12th fret
23.0 mm (1.625 inch)

Scale
648 mm (25.5")

Strings in Setup
.009-.042 set