USED Fender Japan / ST-43 Lake Placid Blue [05]

Fender Japan's ST-43 is now in stock.

This model was manufactured from the late 90's to around 2000, and is the prototype of the later ST-STD model.

It has some signs of use such as scratches and dents, but it has been checked and adjusted as a whole by a professional repair person after arrival, and is in good playing condition.

It is easy to use and reasonably priced for a Japanese-made instrument, and is one that we recommend to those who are just starting out with electric guitars.

Item Rank: B: Fairly scratched & used, but no problems in normal use.

Serial Number: Q085324
Country of manufacture: Japan
Case: Non-authentic soft case
Accessories: Arm
Weight: 3.65kg
Truss Rod: Note that the rod has been loosened and cut off, but there is no problem with the neck.
Fretboard: No problem, sufficient fretboard height.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.4mm
Neck thickness near 1st fret: 20.8mm
Neck thickness near 12th fret: 23.0mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, fret deburring, volume pot replacement, nut groove correction

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup, and may change due to the effects of climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
Q085324

Country of manufacture
Japan

Case
Non-genuine soft case

Accessories
Arm

Weight
3.65kg

Truss Rod
Note: There is no problem with the neck at present due to the rod being loosened and cut off.

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
2.0mm above the 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
41.4mm

Neck thickness near 1st fret
20.8mm

Neck thickness near 12th fret
23.0mm

Scale
648mm (25.5")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, fret deburring, volume pot replacement, nut groove correction