USED Gibson USA / SG Special Cherry 2006 [05]

2006 SG Special is now in stock.

Dot position mark, non-binding, non-covered pickups, etc. are used to achieve high cost-performance.
The previous owner changed the pegs to GOTOH.

The pegs have been changed to GOTOH by the previous owner.
The guitar has been checked and adjusted by a professional repair person after arrival, and is in good playing condition.

Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial number: 005160653
Year of manufacture: 2006
Country of manufacture: USA
Case: Non-authentic soft case
Weight: 3.2kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret Depth: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.1mm
Neck thickness near 1st fret: 21.7mm
Neck thickness near 12th fret: 25.0mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, and removal of burrs

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
005160653

Year of manufacture
2006

Country of manufacture
U.S.A.

Case
Non-genuine soft case

Weight
3.2kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.1mm

Neck thickness near 1st fret
21.7mm

Neck thickness near 12th fret
25.0mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment, and burr removal