USED James Tyler / USA Classic Black [05]

The number of James Tyler "Classics" made in the USA, which are becoming fewer and fewer in the used market, are now in stock!
The serial number indicates that it was probably made in 2002.

JAMES TYLER started out with the "Studio Elite" series of guitars designed to support the diverse music scene of the 80's, followed by the rise of the "Classic Style" in the 90's, and then the "Retro Series", "HD Series" and "Mongoose Series" guitars for the current music scene of the 2000's, which can be called a great mix of music. The "Retro Series," "HD Series," "Mongoose Series," and many other models have been introduced to the world. The JAMES TYLER Classic, the pinnacle of component guitars, is now in stock!

This model is an "orthodox Classic" with an alder body and a quarter-sawn maple neck.

The thickness of the neck was measured to be 22.2mm near the 1st fret and 25.0mm near the 12th fret, so it is probably a fat neck shape.

Front and center pickups are two Dimazio DP410, and rear pickups are Seymour Duncan (model unknown). Controls are a combination of a 5-way switch, Volume, Mid Boost, and Tone.

JAMES TYLER guitars are made only a few hundred each year worldwide due to the use of carefully selected materials and the extremely careful manufacturing process, and are not often in stock. Unlike the ST style guitars, these guitars have a unique James Tyler middle sound, and many people have become addicted to that sound. Although expensive, once you touch this guitar, you will forget about it and concentrate on playing.

There are some scratches and scuffs, but it is hard to believe that this guitar has been in such beautiful condition for more than 20 years since its manufacture.
The neck, frets, truss rod, and all other playing-related conditions are in perfect condition.
The neck, frets, truss rod, etc. are all in good playing condition, and the fret board has been adjusted and fretted at our repair center upon arrival.

Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: 02149
Year of manufacture: 2002
Country of manufacture: USA
Case: Hard case (GATOR)
Accessories: Arm (* missing spec sheet)
Weight: 3.50kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard: No problem, sufficient fretboard height.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.0mm
Neck Thickness near 1st fret: 22.2mm (.874inch)
Neck thickness near 12th fret: 25.0mm(.984Inch)
Scale: 648mm (25.5Inch)
RADIUS: Compound Radius 254mm - 305mm (10 - 12" Inch)
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to be seen in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
02149

Year of manufacture
2002

Country of manufacture
U.S.A.

Case
Hard case (made by GATOR)

Accessories
Arm (* spec sheet missing)

Weight
3.50kg

Truss Rod
No problem, rod checked up to 60 degrees left and right

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.0mm

Neck Thickness near 1st Fret
22.2mm(.874Inch)

Neck thickness near 12th fret
25.0mm(.984Inch)

Scale
648mm (25.5Inch)

RADIUS
Compound Radius 254mm - 305mm (10 - 12" Inch)

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment