USED Fender USA / 1999 American Deluxe Fat Stratocaster Alder Crimson Red Transparent [05]

1999 American Deluxe Fat Stratocaster Alder Crimson Red Transparent is now in stock!
This model is based on the royal 60s Stratocaster specs with an alder body, maple neck, and rosewood fretboard, and incorporates modern specs such as a knife-edge synchronized tremolo with two steel saddle stops and a locking type machine head.

The 9.5" radius one-piece maple neck is gloss-finished and then sanded for a beautiful finish that feels natural in the hand. The pickups are Vintage Noiseless with greatly reduced noise, and a DH-1 humbucker on the rear for flexible sound makeup.

The guitar has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, and mortised at our repair center, so it is ready for immediate use. It is in relatively clean condition for a 1999 model, although there are some signs of use, such as dull parts and scratches. * The back panel is missing.

Although this American Deluxe Stratocaster does not have the S-1 switch, it is equipped with expensive parts such as Vintage Noiseless pickups, roller nut, locking pegs, etc., as is common in this era.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: DN920356
Year of manufacture: 1999
Country of manufacture: USA
Case: G&G Black Tolex Hardcase
Accessories: Arm
Weight: 3.85kg
Truss Rod: Rod is set at 60 degrees to the left and right, no problem.
Fret Remaining: Enough fret height
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.22mm
Neck thickness near 1st fret: 21.03mm
Neck thickness near 12th fret: 22.57mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
DN920356

Year of manufacture
1999

Country of manufacture
U.S.A.

Case
G&G Black Tolex Hardcase

Accessories
Arm

Weight
3.85kg

Truss Rod
No problem, confirmed up to 60 degrees to the left and right of the rod

Fret Remaining
Enough fret height is available.

String height on bass string side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.22mm

Neck thickness near 1st fret
21.03mm

Neck thickness near 12th fret
22.57mm

Scale
648mm (25.5")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing