USED Vanzandt / STV-R2 3-Tone Sunburst Vintage Plus Pickups [05]

Vanzandt's STV-R2 is now in stock.

The STV-R2 is made with an ultra-thin lacquer finish and carefully selected wood materials.
Vanzandt's STV-R2 is called "neo-vintage" because of its high degree of perfection.

The new arrival is a 60s ST style guitar with 2-piece alder body, maple neck, and slabbed rosewood fingerboard.
It is equipped with Vintage Plus pickups.

There are some signs of use such as minor scratches, light dents, and exposed wood due to chipped paint, but it has been checked and overall adjusted by a professional repair person after arrival and is in good playing condition.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: 6001
Case: Hard Case (SKB)
Accessories: Arm, wrench, manual
Weight: 3.48kg
Truss Rod: No problem, rod checked up to 60 degrees left and right, no problem
Fret Depth: No problem, sufficient fret height
String height on bass string: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, nut groove correction, and gouge removal

* Please note that there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand in advance.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial Number
6001

Case
Hard case (SKB)

Accessories
Arm/Spec Sheet, Wrench, Manual

Weight
3.48kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees left and right

Leftover frets
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Strings in setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, nut groove correction, and burr removal