USED Fender USA / American Vintage 62 Jazz Bass 3 Knobs 3-Color Sunburst [4.10kg / made in 2009]

This is a Fender USA American Vintage 62 Jazz Bass, made in 2009.

Fender American Vintage was produced with the concept of faithfully reproducing the specifications of each era. 62 Jazz Bass with Alder body, Maple neck, and slabbed rosewood fingerboard. Controls are 3-knob type with 2Vol/Tone. Vintage specs are inherited in every detail such as reverse winding pegs and vintage type bridge saddle.

The sound is exactly the same as the famous Fender basses of yesteryear. Recommended for bassists who are looking for a vintage sound.

It shows signs of use (finger rest holes, minor scratches, paint chips from tightening the joint plate, scratches from playing, picking marks, fogging and bits on metal parts and screws, and other exterior damage).

The fret board has been set up (fret adjustment, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment) upon arrival, and the fret board is high enough for playing.

* This is a used item, only one of the actual item is available.
* This is a used item, and there are scratches, dents, etc. due to use that may not show up in the pictures. Please understand this in advance.
Product rank: B+: There are some scratches, but no problem in the normal use

Serial number: V169747
Year of manufacture: 2009
Country of manufacture: USA
Case: Hard Case
Accessories: PU fence, bridge cover, mute, finger rest, cable, case key
Weight: 4.10kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret Depth: No problem, sufficient fret height
Nut Width: 38.5mm
Neck Thickness near 1st fret: 21.0mm
Neck thickness near 12th fret: 24.5mm
SCALE: 864mm (34")
RADIUS: 184mm (7.25")
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance: Fret adjustment, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* Please note that this is a used instrument and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number V169747

Year of manufacture 2009

Country of manufacture: U.S.A.

CaseHard case

AccessoriesPU fence, bridge cover, mute, finger rest, cable, case key

Weight 4.10kg

No truss rod problemNo problem when rod is checked up to 60 degrees to the left and right.

No fret remainder problem, enough fret height

Nut width 38.5mm

Neck thickness 21.0mm near the 1st fret

Neck thickness 24.5mm near 12th fret

Scale 864mm (34")

RADIUS184mm (7.25")

Strings for setupD'Addario EXL165 / .045-.105 set

Repair/Maintenance partsFret grating, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment