USED FENDER JAPAN (-2015) / JM66 Candy Apple Red w/ANTIQUITY Candy Apple Red [05]

JM66 made by Fender Japan is now in stock!

It is a matching head version of JM66 in Candy Apple Red, a very popular color that is not often seen in used JM66s.
Alder body, maple neck, and rosewood fingerboard are used.
The pickups have been upgraded to SEYMOUR DUNCAN / ANTIQUITY II Jazzmaster Neck.

There is a large ding on the lower part of the body and a thin line scratch on the whole body.
The condition is good as it has been set up and cleaned.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: U023800
Country of manufacture: Japan
Case: Non-authentic soft case
Accessories: Arm
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right.
Fretboard Height: No problem, fretboard is high enough.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.3mm
Neck thickness near 1st fret: 21.16mm
Neck thickness near 12th fret: 23.25mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment

* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to be seen in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: There are some scratches, but no problem in normal use.

Serial number U023800

Country of manufacture Japan

CaseNon-genuine soft case

AccessoriesArm

No truss rod problemNo problem when rod is checked up to 60 degrees to the left and right

Fret remainder no problem, enough fret height

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 42.3mm

Neck thickness near the 1st fret: 21.16mm

Neck thickness near 12th fret 23.25mm

Scale 648mm (25.5")

RADIUS184mm (7.25")

Strings at setup ERNIE BALL 2223 / .009-.042 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment