USED PRS SE / SE Hollowbody II Charcoal Burst [05]

Paul Reed Smith's SE Hollowbody II is now in stock.

The SE series has achieved high cost performance in terms of country of production, parts, and manufacturing process.
The model in stock is a low-priced model of Hollowbody II, which is a high-end model of PRS Hollowbody models.

The body size is the same as the solid model, and the thickness of the body is a little thicker than the solid model, so at first glance it looks like a small semi-acoustic, but it is a full acoustic model without a center block.

The figured maple top/back and sides are made of mahogany.
The neck is a set neck made of mahogany, and the company's trademark bird inlay is embedded on the ebony fingerboard.

The 58/15 LT "S" pickups are mounted for high clarity and balanced sound.

The guitar has been lightly used, but there is no major damage and it maintains a clean appearance.
The instrument has been checked and adjusted by a professional repair person after arrival, and is in good playing condition.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: E11487
Country of manufacture: China
Case: Hard Case
Weight: 2.97kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard is high enough.
String Height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.2mm
Neck thickness near 1st fret: 22.6mm
Neck thickness near 12th fret: 24.9mm
SCALE: 635mm (25")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and Maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret shaping

specs

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Serial No.
E11487

Country of manufacture
China

Case
Hard Case

Weight
2.97kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.2mm

Neck thickness near 1st fret
22.6mm

Neck thickness near 12th fret
24.9mm

Scale
635mm (25")

RADIUS
254mm (10")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret shaping