USED GIBSON / ES-335 1978 Wine Red [06]

1978 ES-335 with chrome cover engraved numbered PAF!
It has original Schaller nickel-plated Gibson pegs, sombrero knob, blanco tailpiece, and a slim 3-ply maple neck with volute.

There is a replaced strap pin, truss rod cover cracked, escutcheon cracked and distorted, and bridge plating damaged.
There is paint over-lacquer, chipped binding, noticeable paint burn, and paint cracks.
The back of the neck has been painted thickly, and there are deep cracks at the low and high positions, causing bumps.
The back of the neck is painted thickly, and there are deep cracks and bumps in the low and high positions. The nut and frets have been replaced, the fingerboard inlays have been lifted, stud anchors have been filled in, the neck joint has been corrected, and the entire instrument has been adjusted.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: 70908164
Year of manufacture: 1978
Country of manufacture: USA
Case: Hard Case (damaged)
Weight: 3.50kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 40.08mm
Neck thickness near 1st fret: 19.90mm
Neck thickness near 12th fret: 24.84mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repairs and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, buffing, neck reset, fingerboard and inlay correction, refret nut replacement

* Please note that this is a used instrument and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please note that there may be scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to the effects of climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank B: Fairly scratched and used, but no problems in normal use.

Serial number 70908164

Year of manufacture 1978

Country of manufactureUSA

CaseHard case (damaged)

Weight 3.50kg

No truss rod problem.

Fret remainder no problem, enough fret height

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 40.08mm

Neck thickness near the 1st fret: 19.90mm

Neck thickness near 12th fret: 24.84mm

Scale 628mm (24.75")

RADIUS305mm (12")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance partsCleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, buffing, neck reset, fingerboard and inlay correction, refret nut replacement