USED FENDER USA / 1978 Precision Bass Sunburst [06]

FENDER USA 1978 Precision Bass Sunburst is now in stock!
We have determined from the tone pot date that it was made in 1978.
Ash body, maple neck and rose fingerboard.
The volume pot has been replaced.
The pickguard screws have been replaced.

The nut has been replaced and the fretboard has been refretted.
It has a strong sense of use commensurate with its age.
It has been cleaned and adjusted, and there are no problems in playing.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial number: S871432
Year of manufacture: 1978
Case: Soft case
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String Height: Bass string side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 41.79mm
Neck thickness near 1st fret: 22.34mm
Neck thickness near 12th fret: 25.03mm
SCALE: 864mm (34")
RADIUS: 184mm (7.25")
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, nut replacement, refretting

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup, and may change due to climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
S871432

Year of manufacture
1978

Case
Soft case

Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.5mm above 12th fret

String height on treble string side
2.0mm above the 12th fret

Nut width
41.79mm

Neck thickness near 1st fret
22.34mm

Neck thickness near 12th fret
25.03mm

Scale
864mm (34")

RADIUS
184mm (7.25")

Strings for setup
D'Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, nut replacement, refretting