USED IBANEZ / RG8470F / j.custom PR [06]

Ibanez RG8470F j.custom is in stock!

The RG body is made of African mahogany, which has rich mid and low range characteristics, and North American flame maple, which adds the essence of attack and sustain.
In addition, as in the past, the strength of the instrument has been carefully considered, and to return to a more natural sound-oriented approach, maple and wenge (both thick woods) have been combined into 5pcs to complete the instrument.

The pickups are an Air Norton(R) in the neck position for a clear and warm sound, a DiMarzio(R) True Velvet(TM) in the middle position for a bright and low-noise sound, and a DiMarzio(R) True Velvet(TM) in the bridge position for high to low range output. The Tone Zone(R) is equipped in the bridge position for well-balanced and powerful sound.

Back panel is missing, metal parts are damaged by plating, and blackening on the fingerboard side is noticeable.
There are paint cracks at the neck joint and damage to the truss rod adjustment port.
There are paint chips, dents, and scratches on the body, and there is a paint chip on the tip of the head.
It has been cleaned and adjusted as a whole after arrival.

Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: F0629339
Country of manufacture: Japan
Case: Hard Case
Accessories: Arm
Weight: 3.72kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts: cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
F0629339

Country of manufacture
Japan

Case
Hard Case

Accessories
Arm

Weight
3.72kg

Truss Rod
No problem, rod checked up to 60 degrees to the left and right

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Strings in setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment