USED FENDER USA / American Ultra II Stratocaster HSS Ebony Noble Blue [06]

The American Ultra II Stratocaster HSS features a select alder body with deep body contour.
The quarter-sawn maple neck has a Modern "D" neck shape, and the neck back is finished in a tactile Ultra Satin finish.
The 10- to 14-inch compound radius ebony or quarter-sawn maple fingerboard has an Ultra rolled edge with carefully rolled-off edges, medium jumbo frets, luminescent Luminlay side dots, and a Graph Tech TUSQ nut. The guitar is equipped with medium jumbo frets, luminlay side dots and a Graph Tech TUSQ nut.
A tapered neck heel and deep body contour provide easy access to high positions.

The American Ultra II Stratocaster HSS is equipped with two Ultra II Noiseless Hot Strat pickups and Haymaker humbuckers, providing superb tone from sweet crystal-clear cleans to scorching leads, all without the hum. It offers the finest tone without hum noise.
It is in clean condition with no damage.
Cleaned and adjusted as a whole after arrival.
Item rank: A: Beautiful

Serial Number: US240037633
Year of manufacture: 2024
Country of manufacture: USA
Case: Hard Case
Accessories: Arm, wrench, strap pin parts
Weight: 3.65kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.8mm
Neck thickness near 1st fret: 20.7mm
Neck thickness near 12th fret: 21.7mm
Scale: 648mm (25.5")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts: Cleaning, truss rod adjustment, string replacement, string height adjustment, octave adjustment

* The truss rod, fretboard rest, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product rank
A: Beautiful

12 months old

Serial No.
US240037633

Year of manufacture
2024

Country of manufacture
U.S.A.

Case
Hard Case

Accessories
Arm, wrench, strap pin parts

Weight
3.65kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Leftover frets
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.8mm

Neck thickness near 1st fret
20.7mm

Neck Thickness near 12th Fret
21.7mm

Scale
648mm (25.5")

Strings in setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance parts
Cleaning Truss rod adjustment String replacement String height adjustment Octave adjustment