USED FENDER JAPAN / TL52-70LH [06]

A used JV serial TL52-70LH, a 1952 reissue model with flat head screws, is now in stock!
This model is a '52 specs model with minus screws used in various parts, and is one with a lot of details.
There are cracks on the nut, paint is peeling off the fingerboard, and the wood is cracked from the neck pocket to the front PU part.
There is a strap pin relocation mark on the first string horn.
There are paint cracks on the neck joint, dents, peeling paint, and dull metal parts.
It has been cleaned and adjusted, and the frets have been adjusted.

Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: MIJ JV91520
Country of manufacture: Japan
Case: Soft case
Weight: 3.26kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.5mm
Neck thickness near 1st fret: 21.2mm
Neck thickness near 12th fret: 23.3mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

* Please note that this is a used instrument and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B: Fairly scratched and used, but no problem in normal use.

Serial number MIJ JV91520

Country of manufacture Japan

CaseSoft case

Weight3.26kg

No truss rod problemNo problem when rod is checked up to 60 degrees to the left and right.

No fret rest problem, enough fret height

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 42.5mm

Neck thickness near the 1st fret: 21.2mm

Neck thickness near 12th fret 23.3mm

Scale 648mm (25.5")

RADIUS184mm (7.25")

Strings .010-.046 set at setup

Repair and maintenance partsCleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment