USED FENDER JAPAN / PB62 -53 3TS [06]

FENDER JAPAN PB62-53 3TS Used in stock now!
Manufactured by Fujigen from 1993 to 1994.
Basswood body, Maple neck, Rose fingerboard.
PB-VINTAGE pickups are made in Japan.
There is a wood chip on the head top, a paint chip on the neck joint, and deep dents on the body top.
Also, there are scratches and dents on the cutaway.
The cutaway is in player's condition with many scratches, dings, and dull metal parts.
It has been cleaned and adjusted after arrival and is in good playing condition.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: N067551
Country of manufacture: Japan
Case: Hard Case
Weight: 3.865kg
Truss Rod: At the limit of the rod with a note of caution, the neck is currently in good condition.
Fretboard Height: No problem, fretboard is high enough.
String Height Bass String Side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 42.46mm
Neck thickness near 1st fret: 20.72mm
Neck thickness near 12th fret: 24.76mm
SCALE: 864mm (34")
RADIUS: 184mm (7.25")
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
We do not guarantee that these values will be the same when you receive the instrument.

Specs

Item rank B: Fairly scratched and used, but no problem in normal use.

Serial number N067551

Country of manufacture Japan

CaseHard case

Weight 3.865kg

Truss RodCaution: At the limit of the rod, there is no problem with the neck in its present condition.

Fret RemainingNo problems, sufficient fret height

String height: 2.5mm above the 12th fret on the bass string side

String height 2.0mm above the 12th fret on the treble string side

Nut width 42.46mm

Neck thickness near 1st fret 20.72mm

Neck thickness near 12th fret 24.76mm

Scale 864mm (34")

RADIUS184mm (7.25")

Strings D'Addario EXL165 / .045-.105 set at setup

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment