USED FENDER JAPAN / ST62-53 Black [06]

FENDER JAPAN ST62-53 Black Used is in stock now!
Manufactured by Fujigen from 1991 to 1992.
Japanese Strat modeled after the '62.
Basswood body, Maple neck, Rose fingerboard.
Three Japanese ST-VINTAGE pickups.
Tremolo arm and back panel are missing.
There is a large paint peeling on the body side.
Also, there are many line scratches on the elbow contour area as if they were intentionally put there.
The entire instrument is in player's condition with scratches, dents, dullness and rust on metal parts.
It has been cleaned and adjusted as a whole after arrival and is in good playing condition.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: L022527
Case: Soft case
Weight: 3.29kg
Truss Rod: No problem (only a little left), with a note that the rod has been checked up to 60 degrees left and right.
Fretboard: No problem, as good as new.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.68mm
Neck thickness near 1st fret: 20.96mm
Neck thickness near 12th fret: 24.0mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, nut replacement, fingerboard correction, refretting

* Please note that this is a used instrument and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank B: Fairly scratched and used, but no problem in normal use.

Serial number L022527

CaseSoft case

Weight 3.29kg

Truss rod is in good condition, but the rod has been checked up to 60 degrees left and right.

Fret remainder no problem, same condition as new.

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 42.68mm

Neck thickness near 1st fret 20.96mm

Neck thickness near 12th fret 24.0mm

Scale 648mm (25.5")

RADIUS184mm (7.25")

Strings at setup ERNIE BALL 2223 / .009-.042 set

Repair and maintenance partsCleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, nut replacement, fingerboard correction, refretting