USED FENDER JAPAN / JB75-90US 3TS [06]

Used Fender Japan Jazz Bass JB75-90US is in stock!
This Jazz Bass with US pickups follows the 75 style of yesteryear. Ash body, maple neck, block inlay with neck binding, 3 point stop joint, bullet truss rod cap, and J-BASS VINTAGE (USA) PU.
There are metal parts plating damage, PU pole piece rust, head paint damage, scratches, play scuffs, dings, small paint chips, and other overall signs of use.
It has been cleaned and adjusted after arrival, and the frets have been adjusted for fret rubbing.

Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: O012284
Country of manufacture: Japan
Case: Soft case
Weight: 4.90kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fretboard Height: No problem, fretboard is high enough.
String Height on bass side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 38.78mm
Neck thickness near 1st fret: 20.61mm
Neck thickness near 12th fret: 24.30mm
SCALE: 864mm (34")
RADIUS: 184mm (7.25")
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, nut adjustment, peg greasing

* There are scratches, dents, etc. that are difficult to see in the photos or other than those listed due to the used nature of this item. Please understand that there are scratches, dents, etc. that are difficult to be seen in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B: Fairly scratched and used, but no problem in normal use.

Serial number O012284

Country of manufacture Japan

CaseSoft case

Weight 4.90kg

No truss rod problem.

Fret remainder no problem, enough fret height

String height: 2.5mm above the 12th fret on the bass string side

String height 2.0mm above the 12th fret on the treble string side

Nut width 38.78mm

Neck thickness near 1st fret 20.61mm

Neck thickness near 12th fret: 24.30mm

Scale 864mm (34")

RADIUS184mm (7.25")

Strings D'Addario EXL165 / .045-.105 set at setup

Repair and maintenance partsCleaning, string change, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, nut adjustment, peg grease up