USED FENDER USA / 25th Anniversary Stratocaster 1979 Candy Apple Red [06]

Rare CAR 25th Anniversary Stratocaster in stock!
This model was released in 1979 as the 25th anniversary of the Stratocaster.
The ash body and large head maple one-piece neck are combined with a 4-point bolt-on joint. 70's Stratocasters usually had a 3-point joint plus micro-tilt, so this model pays homage to the original Stratocaster in that respect. Anniversary logo is engraved on the joint plate.
The neck date and body date are gone and cannot be read, but the front tone pot date is 79.
Most Anniversary models are silver color, but this one is very rare Candy Apple Red color.
It also weighs 3.59kg, which is relatively light for this age.
Overall, there are scratches and dings consistent with the age of the instrument. The paint is peeling on the fingerboard edge and on the inlay.
The output jack and one wire connecting the jack to the pot have been replaced. Three peg bushings and strap pins have been replaced.
The fretboard has been adjusted and the saddle groove has been corrected, so there are no problems in playing.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: 258630
Year of manufacture: 1979
Country of manufacture: USA
Case: Hard Case
Accessories: Arm, bridge cover, instruction manual (English)
Weight: 3.59kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret Depth: note that the frets are low and can still be cut, but they are about 30~50%.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 40.8mm
Neck thickness near 1st fret: 22.5mm
Neck thickness near 12th fret: 24.0mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Modified: Output jack, internal wiring (1 wire), strap pins, peg bushings (3 locations)
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, saddle groove correction, strap pin replacement

* There are scratches, dents, etc. that are difficult to see in the photos or other than those listed due to the used nature of the instrument. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.