USED Fender Japan / ST57-85LS (ST57-770LS) BLK, Manufactured 1991–1992 [06]

A '57 Stratocaster equipped with Lace Sensor pickups.
The body is made of alder, the neck and fingerboard are maple, and it features three LACE-SENSOR GOLD pickups. Controls include volume, tone, and a mid-boost.

We have refretted and leveled the frets, replaced the nut and pots, and corrected the wiring and circuit board.
The tremolo arm is missing.
The pickguard has been replaced with a non-original part. Please note that the original pickguard is not included.
The control panel on the back of the body (including mounting screws) has been removed and is missing.
There are noticeable dents and scratches with exposed wood on the 1st to 3rd frets of the fingerboard, and there is paint peeling on the sides and end of the fingerboard.
The headstock shows scratches, dents, and peeling paint; the back of the neck has dents and scratches accompanied by dents; and the neck joint area has chipped paint and cracks.
The body has numerous scratches and dents; there is a section of peeling finish approximately 6 centimeters long on the lower left side of the body; the pickguard shows discoloration; and the metal parts exhibit rust, tarnish, and pitting.
There are other signs of wear and discoloration, but the overall condition is good.

Condition Grade: B+: Some minor flaws, but no issues for normal use

Serial Number: U014869
Case: Soft case
Weight: 3.48 kg
Truss Rod: No issues; checked up to 60 degrees to the left and right with no problems
Fret Wear: No issues; in like-new condition
String Height (Low String Side): 2.0 mm at the 12th fret
String Action (Treble Side): 1.5 mm at the 12th fret
Nut width: 43.0 mm
Neck thickness near the 1st fret: 20.8 mm
Neck thickness near the 12th fret: 23.8 mm
Scale: 648 mm (25.5")
RADIUS: 184 mm (7.25")
Strings at Setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, fret leveling, pot replacement, wiring repair, nut replacement, refretting, circuit board repair

* As this is a used item, there may be scratches, dents, and other imperfections that are difficult to see in the photos or not listed here. Please be aware of this in advance.

* Where specifications such as truss rod tension, remaining fret height, or string action are listed, these measurements were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.

* This is a one-of-a-kind item, and we list it simultaneously on multiple online marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize in the unlikely event that the item is sold out after you place your order, and we ask for your understanding.