USED GIBSON USA / 1977 Les Paul Standard Tobacco Sunburst [06]

A used 1977 Les Paul Standard is in stock!

It has late 70's specs, with a large head 3P maple neck, rosewood fingerboard, 3P maple top and mahogany back with thin maple sandwiched between the three layers, commonly known as a pancake body.
The original aluminum shield box remains in the control cavity, and the wiring is believed to be original.
The PU is equipped with the original engraved numbered PAF.
Other hardware also appears to be original, and the pegs have the Norlin-era Gibson logo.

The jack plate has been replaced and the rod cover is cracked.
The entire instrument has been over-lacquered, and the head top has been repainted and the decals have been reapplied, but they are out of alignment with the original position and the original decals are stepped.
There is some paint damage due to stand burning at the border between the neck and head and at the bottom of the body.
There is paint damage and peeling on the back of the neck as well, which appears to be caused by stand burning.
Paint is peeling on the sides of the body, and there are deep dents near the toggle switch plate on the back of the body, as well as extensive buckle scratches.
There are also some minor scratches, dings, and dull metal parts, giving it a slightly used look.
It has been cleaned and adjusted as a whole after arrival, so there are no playing problems.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: 72447542
Year of manufacture: 1977
Country of manufacture: USA
Case: Hard Case (Smells musty, latch on hinge side is hard to close)
Weight: 4.65kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard: Still good for cutting, but the frets are low.
String Height Low String Side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.0mm
Neck thickness near 1st fret: 19.6mm
Neck thickness near 12th fret: 24.2mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, neck ironing, fret adjustment, peg bend correction x 3

* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or scratches not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.