USED FENDER JAPAN / ST72-66US OCR [06]

We've just received a used FENDER JAPAN ST72-66US OCR!
Assembled in Japan from 2002 to 2004.
A Stratocaster featuring 1972-spec specifications, including a large headstock, bullet truss rod nut, and a three-point neck joint.
Features a basswood body with a maple neck and fingerboard.
Equipped with three USA-made ST-VINTAGE pickups.

There is a small chip in the wood on the headstock top, a dent on the body top, and buckle marks and dents on the body back.
There are dents and scratches on the back of the horn.
There are paint cracks and lifting of the clear coat at the neck joint.
While there are other minor scuffs, dents, and some tarnish on the metal parts, this is still a guitar that can be played.
It has been cleaned and fully adjusted since arrival, and there are no issues with its playability.
Condition Grade: B+: Some scratches, but no issues for normal use

Serial Number: Q071575
Country of Manufacture: Japan
Case: Soft case

Weight: 3.58 kg
Truss Rod: No issues; checked up to 60 degrees to the left and right—no problems
Remaining Fret Life: Within normal range; fret height is sufficient for playing
String height (low-string side): 2.0 mm at the 12th fret
String Action (Treble Side): 1.5 mm at the 12th fret
Nut width: 41.7 mm
Neck thickness near the 1st fret: 21.2 mm
Neck thickness near the 12th fret: 24.7 mm
Scale: 648 mm (25.5")
Radius: 184 mm (7.25")
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment

* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.

* Any listed measurements for the truss rod, remaining fret life, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.

* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize in the unlikely event that the item is sold out after you place your order, and we ask for your understanding.