USED Suhr / Custom Standard Quilt Top Floyd Faded Trans Whale Blue Burst [06]

A used 2012 Suhr Custom Standard Quilt Top Floyd has arrived!

The top features a Faded Trans Whale Blue Burst finish, and the back is also finished in Dark Whale Blue.
It features a quilted maple top on a basswood body, a maple neck, and a 22-fret maple fingerboard. The neck shape is “Even C Slim .800-.880,” a moderately thin C-shape. The fingerboard radius is a 9–12-inch compound radius, which feels easy to play—not too flat—among Suhr models. The frets are medium-sized nickel.

The pickups are arranged in an HSH configuration, starting from the front: DSV, ML, and DSV+. Controls include a 5-way selector switch, one volume knob, and one tone knob. In half-tone mode, the humbucker is automatically tapped, and the tone knob’s push-pull function allows for coil tapping of the front pickup only. The decision to intentionally omit a tap for the rear pickup seems to be a design choice prioritizing ease of use on stage.
The bridge features a GOTOH Floyd Rose tremolo, and the tuners are Sperzel locking tuners, which make string changes easy.
The hardware is uniformly black, giving it a sleek appearance. Signs of aging are visible, such as peeling plating on the neck joint screws and rust on the pickguard mounting screws.

Additionally, there is a dent on the 6th-string side of the neck around the 13th fret, and a crack in the finish along with slight lifting at the top of the neck pocket on the body. The pickguard shows yellowing from sun exposure. There are also minor scratches and dents throughout the instrument, including those caused by sun exposure.
Condition Grade: B+: Some minor imperfections, but no issues for normal use

Serial Number: 15720
Year of Manufacture: 2012
Country of Manufacture: USA
Case: Hard case (with some dirt)
Accessories: Arm, spec sheet
Weight: 3.49 kg
Truss Rod: No issues; rod movement tested up to 60 degrees in both directions with no problems
Remaining Fret Life: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 2.0 mm at the 12th fret
String Action (Treble Side): 1.5 mm at the 12th fret
Nut width: 1.650"
Neck thickness near the 1st fret: 0.800"
Neck thickness near the 12th fret: 0.880"
Scale: 648 mm (25.5")
RADIUS: 9"-12"
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment

* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.

* Any listed measurements for the truss rod, remaining fret life, string height, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives.

* This item is a one-of-a-kind product, and we are listing it simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.