USED Gibson USA / Les Paul Special Single Cutaway HC (Grover Peg) [1996/3.92kg]

This Gibson Les Paul Special is a flat top and is used by many artists along with Les Paul Jr.

Mahogany body, mahogany neck, binding-wound mahogany neck, rose fingerboard, mini Grover pegs, TOM bridge and stop tailpiece, P-100 x 2 PUs.

The P-100 pickups have a stacked structure with noise suppression, and the simple yet deep and straightforward sound of this guitar is very attractive.

Overall, the guitar shows signs of use (dents and scratches around the head, neck, and body, scuffs and scratches from playing, picking marks, buckle marks, guitar stand marks on the end, cracks inside the knobs, fogging and pitting on metal parts and screws, and other exterior damage).

The guitar has been set up upon arrival (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, saddle groove correction), the fret board is high enough to play, and the truss rod is adjustable to +/- 60 degrees.

Please read carefully.
* This item is a used item and is only available as a one-of-a-kind item.
* This is a used item, and there are scratches, dents, etc. due to use that may not show up in the photos. Please understand in advance.
* In addition, because it is listed in multiple malls, there is a time lag in the sales situation and inventory situation, there is no real time.
Therefore, there is a possibility that the item has already been sold at the time of order.

Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: 90466507
Year of manufacture: 1996
Country of manufacture: USA
Case: Hard Case (non-original)
Weight: 3.92kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.72mm
Neck thickness near 1st fret: 20.34mm
Neck thickness near 12th fret: 22.57mm
SCALE: 628mm (24.75")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment, saddle groove correction

Specs

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Serial No.
90466507

Year of manufacture
1996

Country of manufacture
U.S.A.

Case
Hard case (non-original)

Weight
3.92kg

Truss Rod
No problem, rod checked up to 60 degrees to the left and right

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.72mm

Neck thickness near 1st fret
20.34mm

Neck thickness near 12th fret
22.57mm

Scale
628mm (24.75")

RADIUS
254mm (10")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, saddle groove correction