USED Fender Japan / TL52 Modified OLB Fender Japan [3.58kg]

TL52 with 5-point black guard finished in 1952 style Fender Japan Telecaster TL52 Modified.

Bridge serial is 1985-1986/neck is TL52 TX stamped. Ash body, maple 1P neck, 184R maple fingerboard, button string guide, and 3-way bridge/brass saddle.

It has a 50s style look with a crisp ash/maple character and a core tone with a strong presence.

The jack plate has been replaced, the front PU has been changed to a Schecter Monstertone / rear PU to a Seymour Duncan STL-2, and the angle has been adjusted by shimming the neck joint due to the height of the front PU. There are some signs of use (body color burn, dents around the head and outer perimeter, large scratch on the horn on the 1st string side, scratches and scuffs, picking marks, blackened fingerboard sides, cloudy/bitz/rust on metal parts and screws, etc., etc.).

The fretboard has been set up (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment/shimming, and fret adjustment) upon arrival. The truss rod is adjustable to tighten or loosen up to ±60 degrees.

Please read carefully.
* This item is a used item and is only available as a one-of-a-kind item.
* Please note that there are scratches, dents, etc. due to use that may not show up in the pictures. Please understand in advance.
* In addition, because it is listed in multiple malls, there is a time lag in the sales situation and inventory situation, there is no real time.
Therefore, there is a possibility that the item has already been sold at the time of order.

Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: A055709
Country of manufacture: Japan
Case: Soft case
Weight: 3.58kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fret Depth: Still good for cutting, but the frets are low.
String Height Low String Side: 2.2mm above the 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.26mm
Neck thickness near 1st fret: 22.36mm
Neck thickness near 12th fret: 25.17mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: D'Addario EXL110 / .010-.046 set
Modification: SW replaced
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment/shimming, fret adjustment

Specs

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Serial No.
A055709

Country of manufacture
Japan

Case
Soft case

Weight
3.58kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees left and right

Fret Remaining
Still can withstand cutting, but the frets are low.

String Height Low String Side
2.2mm above 12th fret

String height on high string side
1.5mm above the 12th fret

Nut width
42.26mm

Neck thickness near 1st fret
22.36mm

Neck thickness near 12th fret
25.17mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
D'Addario EXL110 / .010-.046 set

Modified part
SW replaced

Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment/shimming, fret adjustment