USED Fender USA / 1980 Stratocaster White Rosewood Fingerboard [1980/4.67kg]

This is a 1980 Stratocaster with "S9" serial, featuring 70s specs, large head, headtop serial, ash body with black parts.

Circuit appears to be original, with flat polepiece type pickups: Neck: 126780/Mid: 211880/Bridge: 12348-, Pot: R1378020.

It is 70s-80s vintage with ash body, maple neck, slim nut width, 5-way selector specification with Vol/2Tone control, block saddle, F-key pegs, and 3-point neck joint.

It has been refretted and nut replaced, back panel and screws are missing, former octave screws were replaced with 1-3 and 6 string replacements (original included) due to interference with the strings, and the stately looks of use (color burn, paint surface damage, color shift on the body edge, scuffs and play marks, picking marks, metal parts and screws. The exterior damage includes fogging, bits and rust on metal parts and screws.

The fretboard has been set up (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and fret adjustment) upon arrival, and the fret board is slightly low but high enough for playing.

Please read carefully.
* This item is a used item and is only available as a one-of-a-kind item.
* This is a used item, and there are scratches, dents, etc. due to use that may not show up in the photos. Please understand in advance.
* In addition, because it is listed in multiple malls, there is a time lag in the sales situation and inventory situation, there is no real time.
Therefore, there is a possibility that the item has already been sold when you order.

Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: S938246
Year of manufacture: 1980
Country of manufacture: USA
Case: Hard Case
Accessories: Arm, bridge cover, tags
Weight: 4.67kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees left and right.
Fret Depth: Still good for cutting, but the frets are low.
String Height Low String Side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.1mm
Neck thickness near 1st fret: 22.8mm
Neck thickness near 12th fret: 24.7mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: .009-.042 set
Repair/Maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment
Other: Missing back panel

specs

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Serial number
S938246

Year of manufacture
1980

Country of manufacture
U.S.A.

Case
Hard Case

Accessories
Arm, bridge cover, tag

Weight
4.67kg

Truss Rod
No problem, rod checked up to 60 degrees left and right

Fret Remaining
Note that the frets are low, although they can still withstand cutting.

String Height Low String Side
2.0mm above 12th fret

String height on high string side
1.5mm above the 12th fret

Nut width
41.1mm

Neck thickness near 1st fret
22.8mm

Neck thickness near 12th fret
24.7mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
.009-.042 set

Repair and maintenance parts
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment

Miscellaneous
Missing back panel