USED Gibson USA / Chad Kroeger Signature Blackwater Les Paul Trans Black [2011/3.98kg]

The Gibson Chad Krueger Blackwater Les Paul is the signature model of Nickelback frontman Chad Krueger.

This piezo-equipped model is a blend of electric and acoustic tones, with a AAA figured maple top, chambered weight-relief mahogany back, 50s-style mahogany neck, star-shaped position marks on the side of the neck, and a rose fingerboard. with rose fretboard, electric PUs are 490R & 498T with Ghost-mounted piezo internal bridge, stereo output via 1/4 inch TRS out, and 2Vol/Master Tone/Piezo Vol control.

This model has neat looks and a piezo output that is the key to the Chad Krueger sound.

It shows signs of use (minor scratches around the body, paint chips on the end, scuffs and scratches from playing, picking marks, fogging and bits on metal parts and screws, and other exterior damage).

The fret board has been set up (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and high position adjustment) upon arrival, the fret board is high enough to play, and the truss rod can be adjusted to +/- 60 degrees.

Please read carefully.
* This item is a used item and is only available as a one-of-a-kind item.
* Please note that there are scratches, dents, etc. due to use that may not show up in the photos. Please understand in advance.
* In addition, because it is listed in multiple malls, there is a time lag in the sales situation and inventory situation, there is no real time.
Therefore, there is a possibility that the item has already been sold at the time of order.

Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: 103310687
Year of manufacture: 2011
Country of manufacture: USA
Case: Hard Case
Weight: 3.98kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 20.9mm
Neck thickness near 12th fret: 24.5mm
SCALE: 628mm (24.75")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and Maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, high position adjustment

Specs

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Serial No.
103310687

Year of manufacture
2011

Country of manufacture
United States of America

Case
Hard case

Weight
3.98kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees left and right

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.0mm

Neck thickness near 1st fret
20.9mm

Neck thickness near 12th fret
24.5mm

Scale
628mm (24.75")

RADIUS
254mm (10")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, high position adjustment