USED Fender / Made in Japan Heritage 60s Jazz Bass Rosewood Fingerboard 3-Color Sunburst [4.35kg/2022]

This is a 2022 Fender Made in Japan Heritage 60s Jazz Bass, a series designed to give players the ultimate playing experience.

This Made in Japan Heritage bass has a top lacquer finish and was built under the supervision of Mark Kendrick, a master builder at the Fender Custom Shop with a deep knowledge of vintage instruments, to specifications that will appeal to vintage fans. Alder body, maple neck with 60s C grip, rose fingerboard, vintage frets, Premium Vintage-Style 60s Single-Coil Jazz Bass PU, spiral bridge, clay dot position marks, and reverse winding pegs.

Designed and reproduced based on profiling data from USA products, this is an exquisite Japanese-made instrument with a top lacquer finish and a lot of attention to detail.

It shows some signs of use (scuffs and scratches, paint fading along the wood grain, fogging of metal parts and screws, etc.).

The fret board has been set up (cleaning, string change, rod adjustment, octave adjustment, string height adjustment) when it arrived, and the truss rod can be tightened or loosened up to ±60°.

Please read carefully.
* This item is a used item and is only available as a one-of-a-kind item.
* This is a used item, and there are scratches, dents, etc. due to use that may not show up in the photos. Please understand in advance.
* In addition, because it is listed in multiple malls, there is a time lag in the sales situation and inventory situation, there is no real time.
Therefore, there is a possibility that the item has already been sold at the time of order.

Item Rank: B+: Some scratches, but no problem in normal use.

Serial Number: JD22001640
Year of manufacture: 2022
Country of manufacture: Japan
Case: Soft case
Accessories: Manual
Weight: 4.35kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 38.4mm
Neck thickness near 1st fret: 20.9mm
Neck thickness near 12th fret: 25.4mm
SCALE: 864mm (34")
RADIUS: 184mm (7.25")
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

Specs: D'Addario EXL165 / .045-.105 set

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Serial No.
JD22001640

Year of manufacture
2022

Country of manufacture
Japan

Case
Soft case

Accessories
Manual

Weight
4.35kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.5mm above 12th fret

String height on treble string side
2.0mm above the 12th fret

Nut width
38.4mm

Neck thickness near 1st fret
20.9mm

Neck thickness near 12th fret
25.4mm

Scale
864mm (34")

RADIUS
184mm (7.25")

Strings for setup
D'Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment