USED Martin / B-1 Martin [2.35kg/1999]

This is a USA made Martin B-1 electric acoustic bass, made in 1999.

Electric acoustic bass with royal specs for an acoustic guitar. Spruce top, mahogany sides and back, rose fingerboard and bridge, piezo PU, and endpin jack with no controls with battery at the neck heel.

Additional strap pin at neck heel. Some signs of use (scuffs and scratches, minor scratches on the body back, picking marks around the soundhole, fogging of metal parts and screws, and other exterior damage).

The fret board has been set up (cleaning, string replacement, rod adjustment, fret adjustment, string height adjustment, and deburring) upon arrival, the fret board is high enough to play, and the truss rod can be tightened or loosened up to ±60°.

Please read carefully.
* This item is a used item and is only available as a one-of-a-kind item.
* This is a used item, and there are scratches, dents, etc. due to use that may not show up in the pictures. Please understand in advance.
* In addition, because it is listed in multiple malls, there is a time lag in the sales situation and inventory situation, there is no real time.
Therefore, there is a possibility that the item has already been sold at the time of order.

Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: 690436
Year of manufacture: 1999
Country of manufacture: USA
Case: Hard Case
Weight: 2.35kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String Height: Bass string side: 2.3mm above 12th fret
String height on treble string side: 1.6mm above 12th fret
Nut width: 40.45mm
Neck thickness near 1st fret: 20.64mm
Neck thickness near 12th fret: 25.16mm
SCALE: 864mm (34")
RADIUS: 305mm (12")
Repair and maintenance: Cleaning, string replacement, rod adjustment, fret adjustment, string height adjustment, and deburring

Specs

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Serial No.
690436

Year of manufacture
1999

Country of manufacture
U.S.A.

Case
Hard Case

Weight
2.35kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
2.3mm above 12th fret

String height on treble string side
1.6mm above the 12th fret

Nut width
40.45mm

Neck thickness near 1st fret
20.64mm

Neck thickness near 12th fret
25.16mm

Scale
864mm (34")

RADIUS
305mm (12")

Repair and maintenance
Cleaning, string replacement, rod adjustment, fret adjustment, string height adjustment, deburring