USED Fender Japan / TL62-US 3TS Lindy Fralin Tele Stock Staggard Set MOD [3.66kg / 2012]

Staggered PU modification by Lindy Frehlin. This Fender Japan TL62-US is a Telecaster in the 60s style of yesteryear.

Alder body, maple neck, rose fretboard, mint green parts; PU modified with Lindy Fralin Tele Stock Staggard Set, Funder brass saddle type around bridge, joint plate replaced with USA, The strap pin screws are black.

Alder/Rose royal road 60s Telecaster, with a usable tone with presence, recommended for both lead players and stroke-centered vocal & guitar players.

It shows signs of use (minor scratches/scratches, scuffs and wipe marks, picking marks, metal parts/screws are cloudy, bits rusted, etc.). The non-original soft case has a smell characteristic of long-term storage.

The guitar has been set up (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret groove adjustment, nut groove correction, jack replacement) upon arrival. ±The truss rod can be tightened and loosened to +/- 60 degrees.

Item rank: B+: Some scratches, but no problem in normal use.

Serial number: JD12028514
Year of manufacture: 2012
Country of manufacture: Japan
Case: Soft case
Weight: 3.66kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees left and right.
Fret Depth: Still good for cutting, but the frets are low.
Nut width: 42.5mm
Neck thickness near 1st fret: 22.0mm
Neck thickness near 12th fret: 24.2mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Modified parts: PU, joint plate, bridge
Repair and maintenance: cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, nut groove correction, jack replacement

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup, and may vary due to climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
JD12028514

Year of manufacture
2012

Country of manufacture
Japan

Case
Soft case

Weight
3.66kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees left and right

Remaining frets
Still can withstand cutting, but the frets are low.

Nut Width
42.5mm

Neck Thickness near 1st Fret
22.0mm

Neck thickness near 12th fret
24.2mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Modified parts
PU, joint plate, bridge

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, nut groove correction, jack replacement