USED Greco / EG480R [3.63kg] [1970s] Greco [08]

This is a Greco LP-type EG480 with the so-called "Greco logo with wacker" seen from 1973 to 1975, made in 1970s.

LP type with bolt-on joint, white sycamore top pancake construction, arched hollow body, maple neck, (ebony fingerboard in the catalog specs), 3-point truss rod cover with Custom designation, star-marked pegs, PU is original and stamped "Greco". MAXON 34531 cover & semi-cover type MAXON 14531.

Nut replaced, pick guard missing, rod cover screws x3 are newly installed. It shows signs of use (scratches and paint peeling from the outer surface, scuffs and playing scuffs, picking marks, buckle marks, ring marks on the back of the neck, fogging, bits and rust on metal parts and screws, and other exterior damages). Glue marks can be seen on the position marks on the fingerboard and at the frets. The soft case is very used/torn, and the inside is sealed with duct tape.

The fretboard has been set up (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and fret adjustment) upon arrival. The fretboard is originally low, but the fretboard height is slightly low due to adjustment, and the truss rod has been checked to 60 degrees on both sides and is in good condition (tight).

Item rank: B+: Some scratches, but no problem for normal use.

Year of manufacture: 1973-1975
Country of manufacture: Japan
Case: Soft case
Weight: 3.63kg
Truss Rod: Note: I have checked the rod up to 60 degrees to the left and right and there is no problem (not much left).
Fretboard: Still can be cut, but the frets are low.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Year of manufacture
1973-1975

Country of manufacture
Japan

Case
Soft case

Weight
3.63kg

Truss Rod
No problem (not much left), as confirmed up to 60 degrees to the left and right of the rod.

Fret Remaining
There is a note that it can still withstand cutting, but the frets are low.

String Height Low String Side
2.0mm above the 12th fret

String height on high string side
1.5mm above the 12th fret

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment