USED Fender Japan / MG65 DBL [3.30kg/2010-2012]

This is a Fender Japan Mustang MG65, 2010-2012, with features circa 1965, such as non-contoured body shape, slab-applied Rose fretboard, white button "F-key" pegs, and logo with patent No.

Poplar body, maple neck, 184R rose fingerboard, realistic looks with gaps in the pickguard and control panel, 2 x MG65-VINTAGE PUs with gray bobbin, CTS pot and inch knobs, gapless bridge piece and dynamic vibrato. The guitar has a short scale and each single series.

The unique sound of the short scale and each single series fades out, the light touch dynamic vibrato arming, and the unique tone make this a very appealing instrument.

It shows signs of use (scratches on the outer edge, paint discoloration on the elbow, scuffs and scratches from playing, picking marks, rattling of the begs, fogging, bits and rust on metal parts and screws, and other external damage).

The fretboard has been set up (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and fret adjustment) upon arrival, and the fret board is high enough for playing.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: U003337
Year of manufacture: 2010-2012
Country of manufacture: Japan
Case: Gig Case (non-original)
Accessories: Arm
Weight: 3.30kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Depth: No problem, enough fret height
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 40.7mm
Neck thickness near 1st fret: 20.7mm
Neck thickness near 12th fret: 23.4mm
SCALE: 610mm (24")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial number
U003337

Year of manufacture
2010-2012

Country of manufacture
Japan

Case
Gig Case (non-original)

Accessories
Arm

Weight
3.30kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right.

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
40.7mm

Neck thickness near 1st fret
20.7mm

Neck thickness near 12th fret
23.4mm

Scale
610mm (24")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment