USED Fender Japan / ST72-JB OWH/R [3.58kg / made from 2004 to 2006]

This is a Fender Japan ST72-JB, a limited production model of the "FENDER JAPAN KANDA ORDER", made around 2004.

This model is a Jeff Beck style model that was quietly listed in the "FENDER JAPAN Limited Collection" catalog. It features an alder body, 4-point neck, F-KEY pegs, and WH 3P pickguard. The PU is a USA Texas Special, and it is finished in a 70s style with a bullet truss rod cap and die-cast saddle bridge pieces.

This is an Alder/Rose spec, large head, 4 point stop, and is a model that was used by Jeff Beck in the past.

It is missing the back panel, and shows overall signs of use (color burn, multiple large dents/paint peeling around the perimeter of the body, scuffs and scratches from playing, picking marks, buckle marks, SW cracks, cloudy/pitted/rusted metal parts and screws, etc.).

The fret board has been set up (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, fret deburring) upon arrival, the fret board is high enough to play, and the truss rod is adjustable to ±60°.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: R023526
Year of manufacture: 2004-2006
Country of manufacture: Japan
Case: Soft case
Accessories: Arm
Weight: 3.58kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.7mm
Neck thickness near 1st fret: 21.5mm
Neck thickness near 12th fret: 24.6mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, fret deburring

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
R023526

Year of manufacture
2004-2006

Country of manufacture
Japan

Case
Soft case

Accessories
Arm

Weight
3.58kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
41.7mm

Neck thickness near 1st fret
21.5mm

Neck thickness near 12th fret
24.6mm

Scale
648mm (25.5")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, fret deburring