USED Gibson Custom Shop / 1961 SG Standard Polaris White [made in 2021/2.92kg]

Japan Limited, 1961 SG Standard Reissue in Polaris White finish is now in stock in pre-owned condition!

This is a Japan Limited Edition "Polaris White" finish 1961 SG Standard Reissue. This model is a reissue model from the first period when the SG was called "Les Paul SG".

Production of the SG began in early 1961.
The small head, 5-point small pickguard, neck joint, and other features of the period are elaborately reproduced down to the shape and color.

The color is the traditional "Polaris White" and "VOS" finish with light aging on the painted surface and metal parts.
The pickups are unpotted Custom Buckers, which were used on the 60th anniversary 1959 Les Paul. The pickups have a delicate and wide-range tone with a balanced feel that is not too thick, like an SG, and outputs deep bass to clear treble.

The neck shape is the "1960 Slim Taper Neck Profile," which reproduces the flat and thin grip typical of the 1960s.
The 1961 version is equipped with a "swing-away pull sideway" tremolo, but this model is equipped with a stop bar, which provides rich sustain, a thicker core, and a lighter weight.

There are some paint burns, minor scratches, and rust on the screws, but there are no major scratches and the instrument is in good condition.

The guitar has been set up (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and some fret shaping) when it was first received.

* This is a used item, only one of the actual item is available.
* Please note that there are scratches, dents, and other blemishes that may not show up in the pictures due to use. Please understand it beforehand.

Product rank: B+: There are some scratches, but no problem in the normal use

Serial number: 001012
Year of manufacture: 2021
Country of manufacture: USA
Case: Hard Case
Accessories: check sheet, case key, etc.
Weight: 2.92kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 20.8mm
Neck thickness near 12th fret: 23.2mm
SCALE: 628mm (24.75")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, partial fret shaping

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
001012

Year of manufacture
2021

Country of manufacture
United States of America

Case
Hard Case

Accessories
Check sheet, case key, etc.

Weight
2.92kg

Truss Rod
No problem, rod checked up to 60 degrees to the left and right

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.0mm

Neck thickness near 1st fret
20.8mm

Neck thickness near 12th fret
23.2mm

Scale
628mm (24.75")

RADIUS
254mm (10")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, partial fret shaping