USED FUJIGEN(FGN) / Expert Odyssey EOS-FM-R Ripe Kaki Gradation (Made in Japan)[2022/3.36kg]

Beautiful EOS2-FM-R/RKG with "Ripe Kaki Gradation" coloring, inspired by ripe persimmon.

Fujigen (FGN) Expert ODYSSEY series EOS2-FM-R, made in 2022. Flame maple top/ash back, "moonsault heel cutaway joint," quarter-sawn maple neck, rose fingerboard, C.F.S. (Circle Fretting System), FGN OS-2n/OS-2rw/XPERT-Hf PU, rear PU. It is equipped with a direct SW/rear PU coil-tap SW, GOTOH Magnum Lock pegs and GOTOH 510TS-FE1 tremolo.

This is the flagship model of Fuji stringed instruments, one of Japan's leading technology and OEM production contractors for numerous manufacturers, and boasts high playability and sound variation.

It shows some signs of use (scratches, play marks, picking marks on the pickguard film, fogging of metal parts and screws, and other exterior damage).

The fret board has been set up (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, nut groove correction) upon arrival, the fret board is high enough to play, and the truss rod has been checked to 60 degrees to the left and right.

* This is a used item, only one of the original is available.
* Please note that there are scratches, dents, and other blemishes that may not show up in the photos. Please understand this in advance.
Product rank: B+: There are some scratches, but no problem in the normal use

Serial number: B220618
Year of manufacture: 2022
Country of manufacture: Japan
Case: Hard Case
Accessories: Arm, Wrench
Weight: 3.36kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Scale: 25.5" (648mm)
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, nut groove correction

* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If there are descriptions of truss rod, remaining frets, or string height, they were measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: There are some scratches, but no problem in normal use.

Serial number B220618

Year of manufacture 2022

Country of manufacture Japan

CaseHard case

AccessoriesArm, wrench

Weight3.36kg

No truss rod problemNo truss rod problem, confirmed up to 60 degrees to the left and right.

Fret remainder no problem, enough fret height is available

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Scale25.5" (648mm)

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, nut groove correction