USED Fender Japan / Boxer Series ST-456 Black (Made in Japan / Fujigen)[1984-87 / 3.39kg]

This is a Fender Japan BOXER series ST456, serial E, made in 1984-1987 (Fujigen).

This ST456 from the Boxer series, with its cutting-edge specs and playability, features an alder body, maple neck, rose fretboard, SSH layout PU, Vol/Tone/5-way selector, GOTOH pegs, and 1-ply pickguard.

The BOXER series reflects the 80s style in color, with an angular tone and output for deeper driving sounds.

Refret (slim, low vintage style) & nut replaced, case/arm is not genuine. The guitar shows signs of use (color fading, minor scratches and scuffs, scuffs and play marks, picking marks, buckle marks, fogging, bits and rust on metal parts and screws, and other exterior damage).

The fret board has been set up (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, nut groove correction, and gouge removal) upon arrival, and the fret board is high enough to play well.

* The truss rod is adjustable to ±60° in the tightening and loosening directions and is in good condition.
* Please note that there are scratches and dents due to use, which are difficult to be seen in the photos. Please understand this in advance.
Product rank: B+: There are some scratches, but no problem in the normal use

Serial number: E965179
Year of manufacture: 1984-1987
Country of manufacture: Japan
Case: Soft Case
Accessories: Arm (non-original)
Weight: 3.39kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret Depth: No problem, sufficient fret height
Nut Width: 42.2mm
Neck Thickness near 1st fret: 21.0mm
Neck thickness near 12th fret: 23.1mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, nut groove correction, and gouge removal

* Please note that there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand in advance.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number E965179

Year of manufacture1984-1987

Country of manufacture Japan

CaseSoft case

AccessoriesArm (non-original)

Weight3.39kg

No truss rod problemNo problem when rod is checked up to 60 degrees to the left and right.

No fret remainder problem, enough fret height

Nut width 42.2mm

Neck thickness 21.0mm near the 1st fret

Neck thickness 23.1mm near 12th fret

Scale 648mm (25.5")

RADIUS184mm (7.25")

Strings at setup ERNIE BALL 2223 / .009-.042 set

Repair and maintenance partsCleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, nut groove correction, and gouge removal