USED Gibson Custom Shop / Murphy Lab 1957 Les Paul Custom 3PU w/Bigsby Light Aged [2025/4.53kg]

Gibson Custom Shop Murphy Lab 1957 Les Paul Custom 3-PU w/Bigsby Light Aged.

The Murphy Lab Collection is the culmination of years of aging technology, with a lacquer process that replicates the natural weather checks and feel of vintage, and a "Light Aged" finish, the second most conservative of the four aging levels available, Waffle pegs with pearloid buttons, unpotted custom Bucker pickups and Luxe bumblebee condensers, and pots with vintage curves.

The selector SW back plate has a Custom SHOP plate, but a plain plate is also included.

It has an aged finish with a textured look. There are very few signs of use that may be post-shipment.

The fret board has been set up (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, nut groove correction, and saddle groove correction) upon arrival.

* The truss rod is adjustable to ±60° in the tightening and loosening directions and is in good condition.
* Please note that there are scratches and dents due to use, which may not show up in the pictures. Please understand this in advance.
Product rank: B+: There are some scratches, but no problem in the normal use

Serial number: 7 5354
Year of manufacture: 2025
Country of manufacture: USA
Case: Hard Case
Accessories: Certificate of Authenticity, Back Plate
Weight: 4.53kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Depth: No problem, sufficient fret height
Nut width: 1.687" / 42.85mm
Neck Thickness near 1st fret: 23.4mm
Neck thickness near 12th fret: 26.2mm
SCALE: 24.75" / 628.65mm
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or scratches not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
7 5354

Year of manufacture
2025

Country of manufacture
U.S.A.

Case
Hard Case

Accessories
Certificate, Back Plate

Weight
4.53kg

Truss Rod
No problem, rod checked up to 60 degrees to the left and right

Leftover frets
No problem, sufficient fret height

Nut Width
1.687" / 42.85mm

Neck Thickness near 1st Fret
23.4mm

Neck thickness near 12th fret
26.2mm

Scale
24.75" / 628.65mm

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment