USED Fender / 2023 Collection MIJ Traditional 60s Stratocaster Rosewood Fingerboard Black [3.39kg/2023]

Matching head 2023 Collection, Fender Traditional 60s Stratocaster, made in 2023.

This is a very popular series "Made in Japan Traditional" Strat. Basswood body, U-shaped maple neck, slab-applied rose fingerboard, 648mm (25.5") scale / 241mm (9.5") R / approx. 41.02mm nut, mint green parts, Vintage-Style Single-Coil Strat PU. The PU is a Vintage-Style Single-Coil Strat.

The matching head is the same color as the body, and while reproducing the looks of yesteryear, it has a vintage-style tone and high playability.

It shows signs of use (minor scratches, scuffs, scuffs and scratches, picking marks, fogging and bits on metal parts, etc.).

The fretboard has been set up (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, etc.) upon arrival.

* The truss rod can be adjusted in the tightening and loosening direction, and its operation has been confirmed to be ±60°.
* Please note that this is a used item and there are scratches, dents, etc. from use that may not show up in the photos. Please understand this in advance.
Product rank: B+: There are some scratches, but no problem in normal use.

Serial number: JD22027983
Year of manufacture: 2023
Country of manufacture: Japan
Case: Soft case
Accessories: Arm
Weight: 3.39kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Depth: No problem, sufficient fret height
Nut Width: 1.615" (41.02 mm)
Neck thickness near 1st fret: 21.8 mm
Neck thickness near 12th fret: 23.3 mm
SCALE: 25.5" (64.77 cm)
RADIUS: 9.5" (241 mm)
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment

* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to be seen in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number JD22027983

Year of manufacture 2023

Country of manufacture Japan

CaseSoft case

AccessoriesArm

Weight3.39kg

No truss rod problemNo problem when rod is checked up to 60 degrees to the left and right.

No fret rest problem, sufficient fret height

Nut width 1.615" (41.02 mm)

Neck thickness 21.8 mm near the 1st fret

Neck thickness near 12th fret: 23.3 mm

Scale 25.5" (64.77 cm)

RADIUS 9.5" (241 mm)

Strings at setup ERNIE BALL 2223 / .009-.042 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment