USED Fender / Classic Series 60s Stratocaster Lacquer Rosewood Fingerboard 3-Color Sunburst [3.39kg/2015]

This is a Fender (Made in Mexico) Classic Series 60s Stratocaster with nitrocellulose lacquer finish, made in 2015.

This Stratocaster is a reproduction of a Classic Series Stratocaster with 60s specifications, produced at the Ensenada factory in Mexico. It features an alder body, candy-colored painted C-shape maple neck, 7.25R rose fingerboard, 21F specifications, 1Vol/2Tone/5-Way selector controls, 3 Vintage-Style Single-Coil Stratx PUs, and mint green parts.

The slab-applied Rose fretboard recreates the look of the '62 style of yesteryear, and it combines a hot vintage tone with high playability.

It shows signs of use (minor scratches, scratching, scuffs, playing scuffs, picking marks, fogging, bits and rust on metal parts and screws, and other exterior damage).

The fretboard has been set up (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, ironing, and fret adjustment) when it arrived. The fret board is high enough for playing, and the truss rod has been checked to 60 degrees to the left and right.

* This is a used item, only one of the actual item is available.
* Please note that there are scratches, dents, and other blemishes that may not show up in the photos. Please understand this in advance.
Product rank: B+: There are some scratches, but no problems in normal use.

Serial number: MX15637560
Year of manufacture: 2015
Country of manufacture: Mexico
Case: Hard Case
Accessories: Arm
Weight: 3.39kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.0mm
Neck thickness near 1st fret: 21.4mm
Neck thickness near 12th fret: 23.1mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, ironing, fret adjustment

* This is a used instrument and may have scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number MX15637560

Year of manufacture2015

Country of manufactureMexico

CaseHard case

AccessoriesArm

Weight3.39kg

No truss rod problemNo problem when rod is checked up to 60 degrees to the left and right

Fret remainder no problem, enough fret height is available

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 42.0mm

Neck thickness near the 1st fret: 21.4mm

Neck thickness near 12th fret 23.1mm

Scale 648mm (25.5")

RADIUS184mm (7.25")

Repair and maintenance partsCleaning, string change, rod adjustment, octave adjustment, string height adjustment, ironing, fret adjustment