USED Fender / Made In Japan INORAN Jazzmaster Rosewood Fingerboard Black [3.72kg / made in 2022]

This is a Fender Made in Japan INORAN Jazzmaster.

Based on the specifications of the INORAN JAZZMASTER #1 LTD released by Fender's top-of-the-line Fender Custom Shop in 2011, this model is reproduced in the Made in Japan line, with an alder body and INORAN 59C-shaped maple neck, Alder body, 7.25R Rose fingerboard, 25.5" (648 mm) scale/1.650" (42 mm) nut, American Vintage '65 Single-Coil Jazzmaster PU, Buzz Stop Bar and floating tremolo.

This is a Jazzmaster that combines good looks, playability, and sound, making it a satisfactory choice for fans and Jazzmaster enthusiasts alike.

It shows signs of use (minor scratches on the elbow, scuffs and scratches from playing, picking marks, buckle marks, fogging, bits and rust on metal parts and screws, and other exterior damage).

The fret board has been set up (cleaning, string change, rod adjustment, octave adjustment, string height adjustment) upon arrival, and the truss rod has been checked to 60 degrees left and right.

Item Rank: B+: Some scratches, but no problem for normal use.

Serial Number: JD22020228
Year of manufacture: 2022
Country of manufacture: Japan
Case: Soft case
Accessories: Arm, Wrench
Weight: 3.72kg
Truss Rod: No problem (only a little left) with a note that the rod has been checked up to 60 degrees left and right.
Fret Depth: No problem, sufficient fret height
Nut width: 42.0mm
Neck thickness near 1st fret: 22.0mm
Neck thickness near 12th fret: 23.1mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* This is a used item and there are scratches, dents, etc. that are difficult to see in the photos or other than those listed. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number JD22020228

Year of manufacture 2022

Country of manufacture Japan

CaseSoft case

AccessoriesArm, wrench

Weight3.72kg

Truss RodCautionChecked up to 60 degrees on both sides of the rod, no problem (not much left)

Fret height is high enough.

Nut width 42.0mm

Neck thickness 22.0mm near the 1st fret

Neck thickness: 23.1mm near 12th fret

Scale 648mm (25.5")

RADIUS184mm (7.25")

Strings at setup ERNIE BALL 2223 / .009-.042 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment