USED Fender Japan / JB62-75US 3TS (3-Tone Sunburst) [4.28 kg / Manufactured 2006–2008]

A Fender Japan Jazz Bass JB62-75US equipped with USA-made pickups, manufactured between 2006 and 2008.

The JB62-75US features a slab-joined rosewood fingerboard and follows the 1962-style design with the “spaghetti” logo. It has an alder body, maple neck, rosewood fingerboard, an 864mm (34") scale length, 184mm (7.25") radius, and a nut width of approximately 38.1mm. The bridge features spiral saddles, and it is equipped with a J-BASS VINTAGE USA pickup.

With its alder body and USA-made pickups, this Jazz Bass delivers a distinctive sound character and is highly recommended for home recording.

The strap pins have been replaced, and there are signs of wear (including scuffs and paint chipping around the strap pins, end pin, joint plate, and body perimeter; paint cracks; dents, scratches, picking marks, and buckle marks around the headstock and on the back of the neck; as well as tarnish, pitting, and rust on metal parts, etc.).

It was set up upon arrival (fret leveling, cleaning, string replacement, truss rod adjustment, octave adjustment, and string height adjustment). The fret heights are at a level that poses no issues for playing, and the truss rod can be adjusted in both tightening and loosening directions; it has been tested to operate up to ±60° with no issues.

Condition Grade: B: Shows significant wear and signs of use, but is in good working order for normal use

Serial Number: S081975
Year of Manufacture: 2006–2008
Country of Manufacture: Japan
Case: Soft case (non-original)
Weight: 4.28 kg
Truss Rod: No issues; rod movement up to 60 degrees on both sides has been verified and is normal
Remaining Fret Life: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 2.5 mm at the 12th fret
String Height (Treble Side): 2.0 mm at the 12th fret
Nut width: 39.5 mm
Neck thickness near the 1st fret: 21.2 mm
Neck thickness near the 12th fret: 24.3 mm
Scale: 864 mm (34")
RADIUS: 184 mm (7.25")
Strings at Setup: .045-.105 set
Repairs and Maintenance Performed: Fret leveling, cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment

* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.

* Any listed measurements for the truss rod, remaining fret height, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives.

* This item is a one-of-a-kind product, and we are listing it simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding in such cases.