USED Fender USA / American Professional Telecaster Maple Fingerboard 3-Color Sunburst [2019 / 3.48kg]

The American Professional Telecaster was released to replace the long-time series leader, the American Standard. This is a 2019 American Professional Telecaster from Fender USA.

Alder body, maple 1P neck with satin-finished backside, 22 frets, 9.5R fingerboard, Narrow Tall frets, PU is a master Tim Shaw designed V-Mod Single-Coil Telecaster with 3-way intonation saddle! The instrument is equipped with a 3-way intonation saddle.

It has the look and sound of the Telecasters of yesteryear, but with modern touches such as a modern fretboard radius, fretboard area, and pegs with height differences.

The strap pins have been changed to JimDunlop type (no hardware on the strap side), and the guitar shows signs of use (minor scratches and scuffs, scuffs and play marks, picking marks, fogging, bits and rust on metal parts and screws, and other exterior damage).

The fret board has been set up (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, nut groove correction) upon arrival, the fret board is high enough to play, and the truss rod can be adjusted to +/- 60 degrees.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: US19060414
Year of manufacture: 2019
Country of manufacture: USA
Case: Hard Case
Accessories: bridge cover
Weight: 3.48kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 20.9mm
Neck thickness near 12th fret: 22.1mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, nut groove correction

specs

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Serial No.
US19060414

Year of manufacture
2019

Country of Manufacture
United States of America

Case.
Hard Case

Accessories
Bridge cover

Weight
3.48kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.0mm

Neck thickness near 1st fret
20.9mm

Neck thickness near 12th fret
22.1mm

Scale
648mm (25.5")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, nut groove correction