USED K.Yairi / Angel Series BL-90 N Yairi [2012]

All solid model, K. Yairi Angel Series BL-90, made in 2012.

Angel Series with original shape. Solid sitka spruce top, solid mahogany sides and back, mahogany neck, ebony fingerboard and bridge, clear pickguard, and GOTOH pegs.

The fit, high playability, and voluminous tone make this an attractive piece.

The guitar shows signs of use (scratches, marks from playing and picking, cracks on the fretboard after the 12th fret, repaired cracks in the soundhole, repaired cracks in the britches, cloudy metal parts and screws, and other exterior damage).

The guitar has been set up upon arrival (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, repair of britches on the 6th string side, spacer under the saddle to lower the string height, patch installed at the sound hole neck attachment point, etc.). The truss rod can be adjusted to tighten or loosen up to ±60 degrees.

Please read carefully.
* This item is a used item and is only available as a one-of-a-kind item.
* This is a used item, and there are scratches, dents, etc. due to use that may not show up in the pictures. Please understand in advance.
* In addition, because it is listed in multiple malls, there is a time lag in the sales situation and inventory situation, there is no real time.
Therefore, there is a possibility that the item has already been sold at the time of order.

Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: 50838
Year of manufacture: 2012
Country of manufacture: Japan
Case: Semi-hard case
Truss Rod: No problem, rod is set at 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String Height: Bass string side: 2.2mm above 12th fret
String height on treble string side: 1.6mm above 12th fret
Nut width: 42mm
Scale: 645mm
Strings for setup: D'Addario EJ-16 / .012-.053 set
Repair and Maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, britches on the 6th string side repaired, spacer under the saddle for lower string height, sound hole neck patch installed

Specs

Item rank
B+: Some scratches, but no problem for normal use.

12 months old

Serial number
50838

Year of manufacture
2012

Country of manufacture
Japan

Case
Semi-hard case

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.2mm above 12th fret

String height on treble string side
1.6mm above the 12th fret

Nut width
42mm

Scale
645mm

Strings for setup
D'Addario EJ-16 / .012-.053 set

Repair and maintenance parts
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, repair of britch crack on 6th string side, spacer under saddle for lower string height, patch installed at sound hole neck attachment point