USED Fender Japan / MG69 Old Candy Apple Red Fender Japan [3.33kgkg/2010-2012]

Fender Japan Mustang MG69, made from 2010-2012.

Fender's representative short-scale model along with Jaguar. It is a '69 style with elbow contour and back contour, basswood body, maple neck, rose fingerboard, 2 single PUs, and dynamic tremolo.

Both pickup series and phase-outs give the Mustang a unique tone, and it is recommended for guitarists with small hands or those who use a lot of difficult wide-stretch forms.

It shows signs of use (dents and scratch marks around the body, scuffs and play marks, picking marks, ring marks on the back of the neck, cloudy/bitz on metal parts and screws, and other exterior damage).

The fretboard has been set up (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and fret adjustment) upon arrival, the fret board is high enough to play, and the truss rod is adjustable to ±60°.

Please read carefully.
* This item is a used item and is only available as a one-of-a-kind item.
* This is a used item, and there are scratches, dents, etc. due to use that may not show up in the photos. Please understand in advance.
* In addition, because it is listed in multiple malls, there is a time lag in the sales situation and inventory situation, there is no real time.
Therefore, there is a possibility that the item has already been sold at the time of order.

Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: U014421
Year of manufacture: 2010-2012
Country of manufacture: Japan
Case: Soft case
Accessories: Arm (not genuine)
Weight: 3.33kg
Truss Rod: No problem, rod is set at 60 degrees to the left and right.
Fret Depth: No problem, sufficient fret height
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 40.2mm
Neck thickness near 1st fret: 20.6mm
Neck thickness near 12th fret: 23.3mm
SCALE: 610mm (24")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and Maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, pot replacement

Specs

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Serial No.
U014421

Year of manufacture
2010-2012

Country of manufacture
Japan

Case
Soft case

Accessories
Arm (non-genuine)

Weight
3.33kg

Truss Rod
No problem, rod checked up to 60 degrees to the left and right

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
40.2mm

Neck thickness near 1st fret
20.6mm

Neck thickness near 12th fret
23.3mm

Scale
610mm (24")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, pot replacement