USED Gibson USA / Les Paul Studio Limited Fire Burst 2012 [3.56kg / 2012]

Gibson Les Paul Studio Limited with P-90 and BurstBucker 3, made in 2012.

Originally a modern model (now removed) with "Robot Tuner & Piezo PU/Chameleon Tone active LP-Z preamp". It has a maple top/mahogany back, slim 60s shape mahogany neck, and granadillo fingerboard.

The pegs have been replaced with Grover pegs (with robot tuner marks), the assembly including the piezo has been replaced (there is a hole for wiring under the tailpiece), the jack plate is a standard jack only and currently the SW does not work, and there is no battery installed.

It shows some signs of use (scratches and play marks, picking marks on the pickguard film, cracks inside the knobs, fogging/bitzing of metal parts and screws, and other exterior damage).

The fretboard has been set up (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, circuit replacement) upon arrival, the fret board is high enough to play, and the truss rod is adjustable to +/- 60 degrees.

Please read carefully.
* This item is a used item and is only available as a one-of-a-kind item.
* This is a used item, and there are scratches, dents, etc. due to use that may not show up in the photos. Please understand in advance.
* In addition, because it is listed in multiple malls, there is a time lag in the sales situation and inventory situation, there is no real time.
Therefore, there is a possibility that the item has already been sold at the time of order.

Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: 115020440
Year of manufacture: 2012
Country of manufacture: USA
Case: Hard Case
Weight: 3.56kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.1mm
Neck thickness near 1st fret: 20.55mm
Neck thickness near 12th fret: 22.47mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, circuit replacement

Specs

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Serial No.
115020440

Year of manufacture
2012

Country of manufacture
United States of America

Case
Hard case

Weight
3.56kg

Truss Rod
No problem, confirmed to 60 degrees left and right

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.1mm

Neck thickness near 1st fret
20.55mm

Neck thickness near 12th fret
22.47mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, circuit replacement