跳至产品信息
1 / 16

USED FENDER USA / 1974 Stratocaster [10]

Serial Number : 552536

[SN 552536] USED FENDER USA / 1974 Stratocaster [10]

Item Code: 10-2800002684851
Condition: USED
Store: [10] nagoya

常规价格 ¥554,508 JPY
常规价格 促销价 ¥554,508 JPY
销售额 售罄
结账时计算的运费
If you would like to make a bank transfer, please give us an e-mail with name of your request item.
inquery
inquery
QQ: 3784816402
For customers residing in Japan
Product Rank: C+: Needs repair depending on intended use
Serial number: 552536
Year of manufacture: circa 1974
Country of manufacture: U.S.A.
Case: "FENDER" hard case from that time (*Fender logo specification with no underline & register mark adopted from around 1975 & interior body end part is cushioned)
Accessories: Genuine tremolo arm from those days, original hex height screw on the bridge saddle
Weight: 3.51kg
Truss Rod: No problem, as confirmed by checking the rod to 60 degrees left and right (not much left).
Fret rests: Fret rests are not in good condition and need to be replaced, and the neck grip and fingerboard surfaces need to be refinished and paint correction when next repaired.
String height (bass string side): 2.0mm above 12th fret
String height (treble string side): 1.5mm above 12F
Nut width: approx. 41.0mm to 41.5mm
Neck thickness (near 1F): 20.9mm
Neck thickness (near 12th fret): 22.8mm
Scale: 648mm (25.5")
RADIUS:184mm (7.25")
Setup Strings: ERNIE BALL 2223/.009-.042 set
Modified parts: Neck & Bridge PU: Late 80s or 90s DiMarzio HS-3, Volume Pot: CTS (date is difficult to read due to solder marks), Strap Button: Recent Fender USA, Strap Button
Repair and maintenance parts: cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment
Other than the above changes, the rest of the instrument appears to be in original condition, but it is likely that the body was painted as an overcoat after cracks in the paint film occurred. However, it is cracked and cracked as if it was treated with lacquer paint on top of urethane paint film. It seems as if general paints were sprayed on top of the urethane finish, and the cracks are unique. The urethane finish on the neck is also cracked and peeling. Missing 3rd & 4th string string guide & tremolo back panel, middle PU date: last two digits stamped "74" (difficult to decipher due to age), tone pot date: 250K AUD 137-7408, stains and paint film. Chemical change marks are characteristic of this piece.

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* The items shown in the pictures are all the items including the accessories.
* If there are any problems during the final check before shipping, we will inform you separately.

specs

Product Rank
C+: Needs to be repaired depending on the intended use

Serial No.
552536

Year of manufacture
Circa 1974

Country of manufacture
U.S.A.

Case
FENDER" hard case of the time (*Fender logo with no underline and register mark adopted around 1975 & cushioned body end part of the interior)

Accessories
Genuine tremolo arm from that time, original hex height screw on the bridge saddle

Weight
3.51kg

Truss Rod
No problem (not much left)

Fret remainder
There is a problem, and it is necessary to consider refinishing the neck grip and fingerboard surface and correcting the paint film at the time of the next repair.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12F

Nut width
Approx. 41.0mm to 41.5mm

Neck Thickness (near 1F)
20.9mm

Neck Thickness (around 12F)
22.8mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Setup Strings
ERNIE BALL 2223/.009-.042 set

Modified parts
Neck & Bridge PU: Late 80s or 90s DiMarzio HS-3, Volume Pot: CTS (date is difficult to read due to solder marks), Strap Button: Recent Fender USA, Strap Button

Repair and maintenance
Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

Other
Except for the above mentioned modifications, the rest of the guitar seems to be in original condition, but it is believed that the body was painted as an overcoat after cracks appeared in the paint film. However, the cracks are cracked and cracked as if lacquer paint was used on top of the urethane paint film. It looks as if general paint was sprayed on top of the urethane finish, and the cracks are unique. The urethane finish on the neck is also cracked and peeling. Missing 3rd & 4th string string guide & tremolo back panel, middle PU date: last two digits stamped "74" (difficult to decipher due to age), tone pot date: 250K AUD 137-7408, stains and paint film. The piece is characterized by stains and chemical change marks.
商品ランク:C+:使用目的によって修理が必要
シリアルナンバー:552536
製造年:1974年頃
製造国:アメリカ
ケース:当時の "FENDER" ハードケース(*1975年頃から採用されるノー・アンダーライン&レジスタ・マークのFenderロゴ仕様&内装のボディエンド部位はクッション仕様)
付属品:当時の純正トレモロアーム、ブリッジサドルのオリジナルHEXハイトスクリュー
重量:3.51kg
トラスロッド:注意点ありロッド左右60度まで確認済みにて問題なし(残り少なめ)
フレット残り:不具合あり次回修理時は打ち換えとネックグリップやフィンガーボード面のリフィニッシュや塗膜補正の検討が必要
弦高(低音弦側):12F上 2.0mm
弦高(高音弦側):12F上 1.5mm
ナット幅:約41.0mmから41.5mm
ネック厚(1F付近):20.9mm
ネック厚(12F付近):22.8mm
スケール:648mm (25.5")
RADIUS:184mm (7.25")
セットアップ弦:ERNIE BALL 2223/.009-.042 set
変更箇所:ネック&ブリッジPU: Late 80s or 90s DiMarzio HS-3、ボリュームポット: CTS製(デイトはハンダ痕で読み取り困難)、ストラップボタン: 近年のFender USA, Strap Button
リペア・メンテナンス箇所:クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整
その他:上記の変更箇所以外は粗方がオリジナル・コンディションと思われますが、ボディの塗膜クラック発生後にオーバーコート的に塗装が行われたと思われます。しかし、ウレタン系塗膜の上にラッカー系塗料で処理を行ったのかクラックでバキバキです。その後、その上に一般塗料をスプレーしてあるようにも感じられバキバキ具合が独特です。ネックのウレタン系フィニッシュもクラックと剥離が激しいので、購入を検討なさる方は熟考が必要でございます。リフィニッシュ前提でお考え頂くのが宜しいかもしれません。3弦&4弦のストリングス・ガイド&トレモロ・バックパネルは欠品、ミドルPUデイト: 下二桁 "74" スタンプ(経年の影響でスタンプ解読は困難)、トーンポット・デイト: 250K AUD 137-7408、汚れや塗膜化学変化痕が特徴的な個体でございます。

* トラスロッド・フレット残り・弦高などは弊社リペアセンターにてセットアップ・調整時でのセッティング数値でございます。
* 画像に映っている商品が付属品含め全てとなります。
* 出荷前の最終チェック時に問題があった場合は別途ご案内致します。

specs

商品ランク
C+:使用目的によって修理が必要

シリアルナンバー
552536

製造年
1974年頃

製造国
アメリカ

ケース
当時の "FENDER" ハードケース(*1975年頃から採用されるノー・アンダーライン&レジスタ・マークのFenderロゴ仕様&内装のボディエンド部位はクッション仕様)

付属品
当時の純正トレモロアーム、ブリッジサドルのオリジナルHEXハイトスクリュー

重量
3.51kg

トラスロッド
注意点ありロッド左右60度まで確認済みにて問題なし(残り少なめ)

フレット残り
不具合あり次回修理時は打ち換えとネックグリップやフィンガーボード面のリフィニッシュや塗膜補正の検討が必要

弦高(低音弦側)
12F上 2.0mm

弦高(高音弦側)
12F上 1.5mm

ナット幅
約41.0mmから41.5mm

ネック厚(1F付近)
20.9mm

ネック厚(12F付近)
22.8mm

スケール
648mm (25.5")

RADIUS
184mm (7.25")

セットアップ弦
ERNIE BALL 2223/.009-.042 set

変更箇所
ネック&ブリッジPU: Late 80s or 90s DiMarzio HS-3、ボリュームポット: CTS製(デイトはハンダ痕で読み取り困難)、ストラップボタン: 近年のFender USA, Strap Button

リペア・メンテナンス箇所
クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整

その他
上記の変更箇所以外は粗方がオリジナル・コンディションと思われますが、ボディの塗膜クラック発生後にオーバーコート的に塗装が行われたと思われます。しかし、ウレタン系塗膜の上にラッカー系塗料で処理を行ったのかクラックでバキバキです。その後、その上に一般塗料をスプレーしてあるようにも感じられバキバキ具合が独特です。ネックのウレタン系フィニッシュもクラックと剥離が激しいので、購入を検討なさる方は熟考が必要でございます。リフィニッシュ前提でお考え頂くのが宜しいかもしれません。3弦&4弦のストリングス・ガイド&トレモロ・バックパネルは欠品、ミドルPUデイト: 下二桁 "74" スタンプ(経年の影響でスタンプ解読は困難)、トーンポット・デイト: 250K AUD 137-7408、汚れや塗膜化学変化痕が特徴的な個体でございます。

付款和运输

订单被处理后,商品将从日本石桥店铺发出,当您选择目的地时,运费预算将在结账页面自动计算显示,商品通过EMS和DHL运送到世界各地。

石桥乐器株式会社成立于 1938 年,是日本最受尊敬的乐器零售连锁店,石桥乐器在全球范围内也被视为高品质二手商品的可靠销售商之一。我们在日本各地拥有超过 13 家门店,包括东京、横滨、千叶、名古屋、大阪、广岛、福冈。石桥乐器公司经营的范围包括全新乐器、二手乐器和VIntage乐器。

查看完整详细信息

注意事项

名称中带有“USED”的商品为二手商品,如图所示,二手乐器会有使用过的痕迹。所有商品都经过我们商店工作人员的测试,我们在发货前对每件商品进行了一次测试,以确保它们的正常使用状态。

在ISHIBASHI MUSIC 上出售的所有商品均为我们各个实体店的现货,因此会出现在店铺售完网页没有及时删除的情况。在这种情况下,我们将取消订单并退还收到的所有付款。

买家需承担可能产生的任何及所有关税和海关费用。这些费用不包含在商品价格或运费中。

请在购买之前确认好关税相关事宜后再下单。

我们无法在发货时更改产品价格,也不能将您购买的产品称为礼物。

我们的工作日是周一至周五,周末无法发货和运输。

PACKING BOX SIZES

ABOUT US

石桥音乐株式会社是日本最大的乐器零售连锁店之一。该公司是全球公认的优质二手和古董乐器的可靠销售商。

石桥乐器不仅出售全新,也出售二手乐器及古董乐器。石桥乐器在日本各地拥有超过 11 家门店,包括东京、横滨、千叶、名古屋、大阪和福冈。

所有的商品均由日本各地的石桥乐器发往世界各地,通常运输时间大约需要 7 到 10 天。
我们的营业时间为上午 10:00 至下午 6:00(东京时区)

Sale

1 / 4