USED Noahsark / NAR-SL1 [10]

A certain dealer's original component guitar!

This is a certain dealer's original model from around 2001, when the high-end guitar movement was at its peak. Body and paint are by Combat, neck is by Cruz (although there is a MOMOSE stamp on the neck end...), and this model was built by Zodiac.

Body top is quilted maple, back is 1pcs mahogany, and the saddle is SSH with conductive paint. The neck is made of satin-finished pasted maple with a luxurious bird's eye. Scale is 648mm and fretboard surface is about 12 inches. The frets have been replaced with medium jumbo hybrid stainless steel. The neck shape is approximately C shape, but the low position has a slight V feel. The position marks have been replaced with Avalon, and the pegs have been replaced with crocodile lock type.

The original EMG PU was installed, but currently the front is a DiMaggio DP188, the center is a DiMaggio DP110, and the rear has been replaced with a Duncan TB-6. The front and rear tone pots have been replaced with a push-push type for coil tapping. Controls are 5-way and tremolo is original Floyd Rose. Inertia block is tungsten type.

The body has wipe scratches, scuffs, line scratches, and dents. The pickguard has some fine picking scratches. The blue tint on the body has faded with age. The left side of the tremolo unit and the left side of the rear PU have some dents and scratches, and there are some scratches on the tremolo recess area. There are also small dents on the lower left edge of the body and the lower part of the tremolo. There is a scratch on the side of the body side end pin, and there are also some bump marks on the lower left side of the body. There is a ding on the center contour edge of the body back that is the size of a grain of rice, and there are large and small dings and peeling paint all around the outer perimeter, giving the impression of use. There is a line scratch on the back of the cutaway tip. The back of the neck is shiny in the low position. The fingerboard is generally shiny with finger marks, indicating that the guitar was pulled in firmly. There is no noticeable damage to any hardware, although there are some smudges.

The neck condition is fine, and the truss rod can be adjusted in the direction to tighten or loosen, and can still be turned in the direction to tighten for adjustment. There are no string marks on the frets and about 90% of the strings are left. Currently, the string height is adjusted at about 2.0mm on the 12F 6th string side and about 1.5mm on the 1st string side.

Overall, the guitar has been played well and there are some dents and other signs of use. The PU currently installed is powerful, but the basic components are solid, so you can enjoy changing the PU according to your preference. Recommended for those looking for a high quality Japanese guitar!

Weight 3.47kg
Neck condition no problem
The truss rod is fully tightened in the tightening direction and can be adjusted in the loosening direction.
Fret remaining about 90%.
Country of OriginMade in Japan
CaseNon-genuine hard case (* size is not correct. Please adjust with a towel, cloth, etc. when using)
AccessoriesTremolo arm, strap lock strap side, wrench for adjustment
Item rank B+: Some scratches, but no problem in normal use.
Serial No.