USED MOMOSE / MT1-STD/R 3TS [10]

Item rank: B+: Some scratches, but no problem in normal use
Serial number: 17647
Year of manufacture: probably made in the recent 2020s
Country of manufacture: Japan
Case: Genuine "MOMOSE" gig case
Accessories: HEX wrench, manual for GOTOH [SD-91MG] Magnum lock pegs
Weight: 3.43kg
Truss rod: No problem, rod is fine when checked up to 60 degrees to the left and right.
Fret Height: No problem, enough fret height.
String Height (bass string side): 2.0mm above the 12th fret
String height (treble string side): 1.5mm above the 12th fret
Nut width: -1.0mm
Neck Thickness (near 1st fret): -
Neck thickness (near 12th fret): -
SCALE：-
RADIUS: -
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Modified parts: -
Repair and maintenance parts: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, fret lift correction
Other: *Finish: Top-LACQUER, *There is a 7mm scratch near the edge of the body back on the 6th string side, but the rest of the body is very beautiful.

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* The items shown in the pictures are all the items including the accessories.
* If there are any problems during the final check before shipping, we will inform you separately.

specs * We will inform you of any problems during the final check before shipment.

Item Rank
B+: Some scratches, but no problem in normal use

Serial No.
17647

Year of manufacture
Probably made in the recent 2020's

Country of manufacture
Japan

Case
Genuine "MOMOSE" gig case included

Accessories
HEX wrench, GOTOH [SD-91MG] Magnum lock peg manual

Weight
3.43kg

Truss Rod
No problem, rod checked up to 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width
-Nut width (near the 1st fret)

Neck Thickness (near 1st fret)
Nut Width - Neck Thickness (near 12th fret)

Neck Thickness (near 12th fret)
Neck Thickness (near 12th fret) - Neck Diameter (near 12th fret)

Scale
Neck Thickness (near 1st fret) - Neck Thickness (near 12th fret)

RADIUS
-RADIUS

Strings for Setup
ERNIE BALL 2221 / .010-.046 set

Modification
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, fret lift correction

Others
*Finish: Top-LACQUER, *There is a 7mm scratch near the edge of the body back on the 6th string side, but the rest of the body is beautiful.